Stainless Steel Bollard Covers – Fresh Information On This Issue..

Creating harmony in the middle of heavy foot or vehicle traffic is quite tough, particularly if you own a commercial building. This is often a problem in departmental stores, restaurants, or other crowded places, which is the reason certain regulations are essential for a more organised operation. But apart from these rules, it is additionally essential that you give people some visual signs of what these rules are, by means of stainless bollards so people will be made aware there are rules to be followed.

Bollards in public areas – Bollards are normally found in public areas, and you may find parking bollards in streets with heavy traffic or facing buildings which need defense against vehicles. Some are even used rather than cycle racks. Others would even allow these bikes to be locked for security purposes.

When bollards are installed, it is mainly to strengthen safety. They may be visual indicators that no unauthorised person is able to enter an area, which can be often signified with the help of a chain connecting the bollards. This means that folks are prohibited to get in the region that is cordoned with bollards.

All steel bollards are galvanised to BS EN ISO 1461 and have the option of powder coating to any BS or RAL colour. Mild steel tube comes in varying thicknesses 60mm approximately 114mm diameter have a 3mm thick wall. Diameters above this are 5mm thick as standard. Mild steel tube is available in larger wall thicknesses to offer the greatest safety barriers.

Of suprisingly low maintenance, steel requires only occasional cleaning with warm water and soap or perhaps a mild detergent. In heavy industrial areas or regions of a very high volume of traffic bollards could be subjected to more deposits, so that you can maintain the desired finish a more frequent maintenance programme is recommended.

Stainless Steel Bollard Covers

Areas requiring vehicle access during the day and need a safe and sound area at nighttime can utilise a telescopic bollard. The bollards possess a light lifting weight, approximately 15kgs, and retract to ground level making it possible for continued vehicle access. When the bollard is lifted and locked in place it provides high security towards the area, this design can also be manufactured in a thicker steel wall to offer anti ram resistance.

There are numerous materials employed to make bollards. It can be stone, concrete or steel. Concrete bollards are permanently installed while steel bollards can be found with additional features, including being sound sensitive or automated. Fixed bollards have light reflectors to let people know where they may be located, specially the drivers. Minus the reflectors, they might easily cause accidents to occur in the streets.

Setting up bollards, whether they are utilized as an alternative to get a bike stand or otherwise not, depends upon what type of bollards you have chosen. Fixed bollards need to be installed into concrete or with new foundations. Factors miecfq as the soil condition and design must be carefully examined at first.

On the other hand, removable or manufactured bollards often have their mounting systems. Even when they have to become mounted on their own, no drilling is important to install these sorts of bollards. They don’t have to be glued to the ground either with epoxy or similar materials.

Retractable bollards can also be found. At first glance, they could look like layered telescopes which you can use with manual or automatic features, according to your preference. Manual bollards need to be lifted with the help of lift-assistance mechanisms while automated bollards use hydraulics and electricity.

Leave a comment

Your email address will not be published. Required fields are marked *